Chain Wheel Stainless Stain for Valve Handwheel Opeartion

For industries demanding absolute hygiene or extreme chemical resilience, Veyron Valve’s Stainless Steel Chain Wheel is the definitive remote override solution. Manufactured from solid SS304 or SS316, this unpainted actuator is completely impervious to saltwater, aggressive sanitizing agents, and acid washdowns. It is specifically engineered to prevent the paint-flaking and rust-contamination common in pharmaceutical cleanrooms, food processing lines, and marine platforms. Featuring an integrated stainless steel guide loop, it ensures smooth, non-sparking chain alignment, providing reliable floor-level control of overhead piping networks under the most demanding sterile or offshore conditions.

Product Details

Chain Wheel Stainless Stain for Valve Handwheel Opeartion

In pharmaceutical, food-processing, and offshore marine environments, standard painted actuators are a severe liability due to chemical washdowns and salt-spray oxidation. Veyron Valve’s Stainless Steel Chain Wheel is engineered specifically to eliminate paint-flaking and rust contamination. Fabricated from solid SS304 or SS316, this unpainted, electropolished actuator withstands harsh CIP (Clean-in-Place) chemicals, acidic sanitizers, and marine atmospheres, ensuring full compliance with international sanitary and safety regulations.

As visible in our heavy-duty design, this wheel avoids complex cast pockets where moisture, bacteria, or corrosive salts can harbor.

Smooth-Finished Welds: The solid spoke arms are welded to the hub using gas-tungsten arc welding (GTAW) and passivated. This eliminates surface porosity and micro-cracks.

Concentric Clamp Hub: The dual-bolt clamping mechanism mounts directly onto native handwheels without pipeline shutdown. The heavy-duty stainless steel hex bolts provide high clamping force, preventing slippage under sudden torque loads while maintaining structural balance on the valve stem.

Technical Specifications

Technical Feature	Engineering Specification
Body Material	Stainless Steel SS304 (CF8) / SS316 (CF8M)
Standard Diameters	200mm / 290mm / 410mm / 574mm (Custom sizes available)
Valve Size Range	Suitable for valve sizes from DN50 to DN1200
Attachment Style	Direct Concentric Clamping (No valve disassembly)
Fasteners & Hardware	High-Tensile Stainless Steel Hex Bolts
Surface Treatment	Electropolished / Satin Passivated

This stainless steel series is widely utilized to operate overhead chemical dosing valves, sterile steam lines, and marine ballast systems. The non-sparking properties of austenitic stainless steel make it exceptionally safe for explosive atmospheres (ATEX zones). By routing a stainless steel link chain through our integrated, low-friction guide loop, operators can safely run critical isolation cycles from the floor level, bypassing the need for hazardous ladder climbing or costly electrical automation.